Ultrasound Diathermy Unit

Fisiosonic® Plus is a novel ultrasound therapy device that employs an innovative output stage known as Class E.

The mechanical efficiency of the Class E output stage is significantly greater than that of conventional output stages, enabling the operator to administer high powers to the patient on a continuous basis with minimal thermal impact.input:
output:Signs:

EPICONDYLITISMUSCULAR LESIONS

IMPINGEMENT SYNDROMETENDINITIS
FIBROUS ADHESIONS
FibromyalgiaMUSCULAR TENSIONS

TEARS IN THE MUSCLE ACTIVE HYPERAEMIAinput:
output:A.F.S. (AUTOMATIC FREQUENCY SWITCHING) is the exclusive device that achieves automatic frequency switching. This device enables the simultaneous utilization of the diverse focalizations of 1 and 3 MHz frequencies, enabling the establishment of distinct supplying times for each frequency. This function enables the operator to acquire a focalized action.

For underwater treatments, the applicators are waterproof.

The instrument can be operated in two modes: continuous and pulsed. In order to mitigate the thermal effect and maintain the same peak pressure applied by the acoustic wave to the tissues, the pulsed operating mode allows for the modulation of energy (duty cycle from 10% to 90%). The output power density can be adjusted from 0 W/cm2 to 3 W/cm2.

The Fisiosonic Plus® is equipped with a visual and sound contact control system, as well as a self-calibration system. The appliance is equipped with an inlet for the connection of an electrotherapy appliance (Modulo series). The operator can subsequently perform a combined therapy with any applicator.