Tibial Bearing

It enables the implant to be fixed in a straightforward and flawless manner with minimal bon resection. The articulating surfaces are optimized to ensure maximum mobility, minimal wear, and good functional stability. The complete range of sizes is evenly covered by the assortment of available sizes, all of which are available in left and right variants. This, in conjunction with PE liners of varying thicknesses, enables the resolution of nearly every situation that may arise during the primary implantation of a knee endoprosthesis. The patella that replaces the facets of the knee cap is included in the implant delivery.THE IMPLANT’S CHARACTERISTICS: The implant is intended for operations that involve the preservation of LCP (type SVL) or the substitution of LCP (type SVS) anatomically shaped femoral and tibial components, specifically the L and R variants.sufficient selection of sizes (six sizes)The integration of varying femoral and tibial component sizes is facilitated by variability.the design allows for the compensation of defective femorotibial and femoropatellar interfacesThe decision to employ type SVL or type SVS during the operation is facilitated by the interchangeability of elements.The femoral component is consistently composed of cobalt alloy (ISO 5832-4), while the tibial component is composed of titanium alloy (ISO 5832-3). The PE liner is composed of UHMWPE (ISO 5834-2). The patella is available in four sizes and is also composed of UHMWPE (ISO 5834-2).optional utilization of a navigation system