Sample Concentrator

The term “concentrator” denotes the quantity of a substance contained within a specific area. Concentration is particularly employed in laboratories to concentrate or prepare samples in batches.input:
output: The air circuit control patent design is distinctive, as it improves air tightness and minimizes the risk of air leakage. In order to activate the channel switch, simply lift or press the air needle; the status of each channel is readily apparent. The gas is simultaneously blown to the surface of the solution through the gas needle, thereby promoting the rapid evaporation of the solution and concentration of the sample. The heater rapidly heats the sample to the evaporation temperature. The air chamber plate’s height can be adjusted. The standard length of a gas needle is 150 mm.
In order to prevent gas waste, each needle can be individually blown and its flow regulated.Characteristics The air circuit control patent design is distinctive, as it improves air tightness and reduces the risk of air leakage. It is simple to operate, as it requires only the lifting or pressing of an air needle to activate the channel switch. The switching status of each channel is readily apparent. The gas is simultaneously blown to the surface of the solution through the gas needle, thereby promoting the rapid evaporation of the solution and concentration of the sample. The heater rapidly heats the sample to the evaporation temperature. The air chamber plate’s height can be adjusted. The standard length of a gas needle is 150 mm. Separate blowing of six needles and flow regulation of each needle are available to prevent gas waste. The ventilation cabinet can be used to place the entire equipment when the concentration sample is in toxic solvents.