Pressure Leak Tester

The process of leakage testing is crucial for the safety of both the endoscope and the patient.input:
output:It is recommended that the potential leakages be assessed using the endoLeakage leakage testing device after endoscopic procedures.input:
output:endoLeakage is capable of identifying endoscopes and operators through RFID technology. It maintains this data concerning the process's date and outcome. It transfers the results of the leakage testing process, which lasts approximately one minute, to the medGate server via the network system to which the device is connected. A printout can be obtained from the printer located above.



It is equipped with a leakage test connector.





The leakage test connector is connected to a hose.>




The maximum pressure that can be applied is 440 mbar.>




It is compatible with a 220-240 V 50Hz feeder power source.>




It utilizes RFID technology to identify endoscopes.>




it identification operator with RFID.input:
output:Serial numbers can be used to identify endoscopes.input:
output:Operator identification is feasible.input:
output:An information storage unit is available to record the results of leakage tests, endoscopes, operators, testing results, and time.input:
output:The data storage section contains information that is compatible with the medGate, EIS, or HBYS server management systems over the network.>




It is equipped with a power on/off switch, a stop switch, and a start switch.