Piezoelectric Ultrasonic Insert

Developed to enhance access.BUC 1 – “The Cutter”A rounded tip eliminates clefts and ditches in the pulp chamber floor.Refinement and cutting of line anglesPursuing calcifications

Smoothing access walls

Cutting MB troughs

Diamond-coated

Water port17.0 mm in length and 0.6 mm in diameter

Fine Grit”The Slim Cutter” – BUC 1AA rounded tip eliminates clefts and ditches in the pulp chamber floor.An excellent suggestion for slicing through gutta percha in retreatment cases

Assists in the removal of separated instruments.Diamond-coated for a smooth cutting actionPort of Water

The diameter is 0.3 mm, and the length is 22.0 mm.

Fine GritBUC 2 – “The Planer”The horizontal smoothing of pulp chamber floors is facilitated by the disk-like tip.input:
output:Remove the pulp stones that are attached in a safe manner by using a plane.The chamber floor is not cut due to the distinctive design.

Diamond-coatedWater port17.3 mm in length and 1.4 mm in diameter

Medium GritBUC – 2A – “The Precision Planer”
A smaller diameter enables the precise smoothing of corners.input:
output:
An excellent suggestion for the corners of molar access and bicuspid access preparations

It is coated with diamonds.Port of Water17.3 mm in length, 1.0 mm in diameter

BUC 3 – “The Digger”

Fine GritExtremely active tip for cutting apically into calcified canals.input:
output:An exceptional suggestion for troughing around posts

Perfect washing is facilitated by the water port situated on the shaft.and operation site coolingDiamond-coatedThe length is 20.2 mm.Fine Grit

BUC 3A – “The Slimmer Digger”input:
output:Developed for the purpose of troughing around damaged instruments in the coronal half of the root.input:
output:Diamond-coatedThe water port is situated at the rear of the shaft.

The BUC-3 has a diameter of 1/2 and a length of 24.2 mm.

Fine Grit

BUC Set of 6 – Contains BUC 1, 1A, 2, 2A, 3, and 3A