Pharmacy Refrigerator

DIN 13277 certification is currently in progress, as is IEC 60068-3 compliance.input:
output:AestheticsExterior finish: White/Steel

HIPS polystyrene is the material used to construct the inner cabinet.

Door type: Double-panel selective glass door

Self-closing door: YesVertical metallic handleinput:
output:Product specifications in generalTotal capacity: 385

A temperature range of +10 to +35 is considered ambient.

Relative humidity: less than 75%

Temperature range / factory temperature setting: +5

Heat output: TBC kJ/hFluctuation: 0.5°CGradient: 2.9°C

dB(A) rel pW: 42input:
output:Sizes

Internal dimensions are as follows: 1645 x 500 x 418 mm.Dimensions of the package (H x W x D) are as follows: 2080 x 620 x 630 mm.Depth (open doors): 1160 mmBrut weight: 86 kg Electrical characteristics:The daily energy consumption is 1,28 kWh per 24 hours.

Annual energy consumption: 467,00 kWh

Voltage/frequency rating: 220-240 V/50 Hz

Cord length in centimeters / Type: 180 / Euro plug

Location of internal lighting: Vertical on the right side

The lighting technology employed was LED.input:
output:Equipment and technical maintenanceDynamic cooling system

R600a is the refrigerant.

Volt-free alarm contact: Yes

Yes, protection against contact with cold surfaces is provided.Yes, a safety thermostat is in place to prevent the temperature from falling below +2°C.Connection to an external alarm system: YesYes, data transmission is possible through the RS485 network.

Temperature recording and transfer via mobile application (connected via Bluetooth): YesNo, temperature recording and transfer via USB are not supported.

The controller is equipped with an emergency power supply.Alarm indicator activated in response to temperature fluctuations (remains visible until manually removed): YesExternal probe connection: YesThe controller displays the actual temperature as the minimum and maximum: Certainly.Safety controller: Yes