Operating Room Cabinet

with a mechanical blocker

accompanied by an electromagnetic blockerwith an electric lock

The pass-through cabinet, which is directly installed into a partition, is employed to facilitate the transfer of small objects and materials between rooms with varying degrees of sterility. Sandwich panels comprise the walls, top, and bottom of the pass-through cabinet. A HEPA filter is installed in the cabinet's top opening if laminar flow is desired within the cabinet. The right door is equipped with a grille at the bottom to facilitate the exhaust of air from the cabinet.



A perforated metal plate is located at the base of the cabin, beneath which is a sump tray, in the event that it is feasible to install a regulating ventilation grille in the panel.



The product has been certified in the European Union.input:
output:The standard cabin layout is intended to accommodate a maximum load of 10kg.

The note must specify the need for a higher carrying capacity of the pass-through cabin.input:
output:Circulationactivepassive

Active: The air is filtered through a HEPA filter and absorbed by the device. The air is then exhausted to a lower-quality area.Passive - no HVAC treatment.Blocking deviceST-DB100 electronic solenoid lock with indicator

A mechanical blocker is installed in the cabin.

The cabin is not obstructed.Cabin with a sign