Laboratory Water Distiller

Modern, stainless steel, single distillation water distiller that is automatically controlled and all-in-one. Developed to generate high-quality distillate without the need for full-time personnel supervision. CE-certified.input:
output:Characteristics: A monoblock (all-in-one) design with a built-in tank
High-quality distilled water with a conductivity of approximately 2.5 µS/cm at 25°C. In comparison to distiller + separate tank systems, this system is less expensive. The electronic control system automatically cuts off water and power when the tank is full, and it also initiates automatic operation after the distillate is withdrawn.
The original design enables the production of distilled water at a temperature of approximately 35-40°C without the need for a separate chiller.

Electronic leakage protection system with solenoid valve

Condenser-tank and evaporator are easily accessible for maintenance (cleaning, etc.). Condenser that is effortlessly replaceable The evaporator is equipped with an automatic level control system. Visual control of the distillate level in the tank is achieved by means of a glass level-tube located on the front panel. High-quality stainless steel is utilized for all components that come into contact with water or steam. Extended resource stainless steel tubular heater
Thermostatic low-water cut-off safety system All installation components are included and are ready for immediate use. Additionally, there is a two-year worldwide warranty. The technical specifications are as follows:8 liters of storage capacityEnergy consumption: 3 kW/h (0.75 kW/l)3 kW, single-phase, 230 V/50 Hz power supply

Distillate conductivity is 2.5 µS/cm at 25°C.The material is stainless steel.The material of the heater is stainless steel.Dimensions (W x D x H): 630 x 350 x 490 mmThe net weight is 23 kg.Continuous operating mode / break duration: 8 hours / 2 hoursTime required to transition to operating mode from a cold start is 15 minutes.