Product fit review
Compare the available product information with your application and purchasing requirements.
Medical equipment Select an image to inspect
Available for inquiry Specification-led inquiry
Medical equipment sourcing
Ion Exchange Water Purifier
Reference: 1003956Laboratory Infrastructure
| Purification Technique | Ion Exchange |
| Applications | Laboratory |
Associated tags
Documentation request
Ask which specifications, manuals, or commercial documents are available for review.
Supplier coordination
Discuss quantity, destination, packaging, and timing before confirming suitability.
Product information
Product summary
Pure water quality ranges from 0.1 to 20 μS/cm.
The capacity is 425 liters at a total salinity of 10°.
Output: 50 liters per hourWeight: approximately three kilograms
Dimensions: approximately 600 x 100 mm in diameterinput:
output:DescriptionDAB and EuAB-compliant practical ion exchanger for fully desalinated water. The blue light protection cartridge is devoid of algae.
The conductivity meter is delivered with a wall bracket, inlet hose, and outlet hose.
(Hose connections are 3/4 inch).
– maximum water temperature: 30°C
– electrical connection: 230 V/50–60 Hz- Composition: Polyethylene
– Measurement range: 0 to 50 μS/cm
The capacity is 425 liters at a total salinity of 10°.
Output: 50 liters per hourWeight: approximately three kilograms
Dimensions: approximately 600 x 100 mm in diameterinput:
output:DescriptionDAB and EuAB-compliant practical ion exchanger for fully desalinated water. The blue light protection cartridge is devoid of algae.
The conductivity meter is delivered with a wall bracket, inlet hose, and outlet hose.
(Hose connections are 3/4 inch).
– maximum water temperature: 30°C
– electrical connection: 230 V/50–60 Hz- Composition: Polyethylene
– Measurement range: 0 to 50 μS/cm
Shipping & Delivery FAQ
How are products prepared before shipment?
Each item is checked against the catalog record, protected with suitable packaging materials, and prepared with available product documentation for procurement review.
Can you support international delivery requests?
The support team can coordinate delivery options by destination, product type, and documentation requirements before confirming availability.
Are fragile or calibrated products handled differently?
Sensitive products are packed with additional cushioning and handling notes; calibration or compliance documents can be reviewed during the inquiry process.
How can I estimate lead time?
Lead time depends on stock status, destination, carrier availability, and any requested documentation. Contact the product team for a product-specific estimate.
Continue your equipment review
Related products
Medical equipment Operating Room Control Panel
Available for specification review
Medical equipment Operating Room Control Panel
Available for specification review
Medical equipment Chemical Fume Hood
Available for specification review
Medical equipment Heating Oven
Available for specification review
Medical equipment Radiation Source Monitoring System
Available for specification review
Medical equipment Teaching Fume Hood
Available for specification review
Medical equipment Teaching Fume Hood
Available for specification review
Medical equipment Exhaust Fume Hood
Available for specification review
Medical equipment Clean Room
Available for specification review