Product fit review
Compare the available product information with your application and purchasing requirements.
Medical equipment Select an image to inspect
Available for inquiry Specification-led inquiry
Medical equipment sourcing
Dental Contra-Angle Handpiece
Reference: 811283Dental Instrument
| Applications | Dental |
| Operation | Air |
| Other Characteristics | Autoclavable |
| Gear Ratio | Reduction |
| Material | Stainless Steel |
Associated tags
Documentation request
Ask which specifications, manuals, or commercial documents are available for review.
Supplier coordination
Discuss quantity, destination, packaging, and timing before confirming suitability.
Product information
Product summary
1. Increased torque supply as a result of the 4:1 reduction in speeder
2. A water/air-separated supply is used to generate an optimal spray for operation.
3. Multifunctional skid resistance sleeve with an interchangeable FG/CA head.
4. It is employed for the purpose of grinding and polishing.input:
output:Instructions:After each treatment, the handpiece is sterilized in an autoclave using the following procedure:
1. Clean the handpiece by removing the bur and brushing it clean. Then, clean the outside of the handpiece with an alcohol solution.
2. Lubricate the handpiece by placing two drops of lubricant into the air inlet pipe.
3. Insert into the autoclaving pouch and indicate.
4. The handpiece should be autoclaved at 135℃ for 12 minutes.
2. A water/air-separated supply is used to generate an optimal spray for operation.
3. Multifunctional skid resistance sleeve with an interchangeable FG/CA head.
4. It is employed for the purpose of grinding and polishing.input:
output:Instructions:After each treatment, the handpiece is sterilized in an autoclave using the following procedure:
1. Clean the handpiece by removing the bur and brushing it clean. Then, clean the outside of the handpiece with an alcohol solution.
2. Lubricate the handpiece by placing two drops of lubricant into the air inlet pipe.
3. Insert into the autoclaving pouch and indicate.
4. The handpiece should be autoclaved at 135℃ for 12 minutes.
Shipping & Delivery FAQ
How are products prepared before shipment?
Each item is checked against the catalog record, protected with suitable packaging materials, and prepared with available product documentation for procurement review.
Can you support international delivery requests?
The support team can coordinate delivery options by destination, product type, and documentation requirements before confirming availability.
Are fragile or calibrated products handled differently?
Sensitive products are packed with additional cushioning and handling notes; calibration or compliance documents can be reviewed during the inquiry process.
How can I estimate lead time?
Lead time depends on stock status, destination, carrier availability, and any requested documentation. Contact the product team for a product-specific estimate.
Continue your equipment review
Related products
Medical equipment Dental Laboratory Micromotor
Available for specification review
Medical equipment Dental Laboratory Micromotor
Available for specification review
Medical equipment Dental Laboratory Micromotor
Available for specification review
Medical equipment 
Medical equipment 
Medical equipment 
Medical equipment 
Medical equipment 
Medical equipment