Custom Laboratory Bench

The following are included in the custom worksurface options:• Epoxy resin that is 1 inch thick,• Phenolic resin, 1 inch• Plastic laminate with a thickness of 1-1/2 inches• Electrostatic dissipating laminate with a thickness of 1-1/4 inches• Optical breadboard made of aluminum or stainless steelinput:
output:Options for custom benches and stands consist of:

• Increase storage capacity by lowering the steel shelf

• Seismic levers• A set of four standard swivel locking casters• A set of four (roll and set) casters

• Available in ADA height and adjustable height models.• Cabinets and bottom shelves are among the available alternatives.Standard Bench/Stands for Unitized EnclosuresAvailable in widths of 4', 5', 6', and 8'. Depths of 30" and 36" are available. Tested to a load capacity of 2000 pounds.Telescoping with adjustments The standard color is silver beige, and the 2" square steel legs can be adjusted to a height of 28, 30, 32, or 34".

Each leg is equipped with robust dual locking bolts. On all four legs, there are leveling legs that are adjustable in height. Leg seismic levelers are available as an option.

Worksurfaces and equipment loading are securely supported by perimeter framing with two center bars.input:
output:Alternatives:• Additional storage is provided by the lower steel shelf.• Four standard swivel locking casters• Four-piece set of Roll and Set casters

• Tables and cabinets that are tailored to your specific requirements.