Cryosurgery Unit

METRUM manufactures the cutting-edge cryosurgical device, CRYO-S ® Electric II. Since 1992, CRYOFLEX has been the next generation of surgical equipment. input:
output:The site of a procedure can be maintained under sterile conditions by automatically performing mode selection probe, cleaning, and freezing using a footswitch or a convenient touch screen.input:
output:RFiD – electronic communication between the probe and device enables the identification of optimal operating parameters and auto-configures to the cryoprobe’s characteristics. Any manual adjustment is unnecessary; pressure and gas flow are automatically established.input:
output:Contains two freezing modes (sequential and concurrent) and an automatic cryoprobe test system. The autocleaning and short freezing tests are included in the probe test system.

Voice communication is integrated to facilitate work. During the procedure, the system provides information regarding key figures.input:
output:Any manual adjustment is unnecessary; pressure and gas flow are automatically established. Stop, preparation, ready, freezing, and cleaning are all automatic operating modes.input:
output:Carbon dioxide: CO2 (-78°C) or nitrous oxide: N2O (-89°C) are the preferred working medium for CRYO-S ® Electric II. These gases are both highly efficient and user-friendly.input:
output:Approximately 60 procedures can be performed with a 10-liter cylinder of CO2/N2O.input:
output:Interface that is user-friendlyinput:
output:The CRYO-S ® Electric II is managed by a microprocessor, and all parameters are displayed and monitored on an LCD screen. The cryoprobe temperature, cylinder pressure, gas flow within the cryobrobe, and procedure time are all displayed during the freezing process.