Clean Room Pass Box

THE ITEMS AND MATERIALS CAN BE TRANSFERRED VIA THE PASS BOX (SLUICE):input:
output:For instance, between rooms with varying degrees of cleanliness, such as those with a low cleanliness class and those with a high cleanliness class. *In accordance with the air cleanliness classification ISO 14644-1-99.input:
output:Between the zones of varying biological safety (from hazardous to clean and vice versa), exclusion of emissions of pathological biological agents and microorganisms (with air or transferred materials).input:
output:
The pass box can be incorporated into the partition wall of any material.



When it is installed in a bearing wall (brick, concrete, etc.) without a frame stand, the maximum width of the wall is restricted to 500 mm. input:
output:The maximum width of the wall is 380 mm when installed in light or thin walls (e.g., drywall, metal). In this instance, the frame stand is retained to ensure the stability of the pass box during the exploitation period.input:
output:A power source must be available at the location where the pass box is installed.input:
output:EASY USE OF THE PASSBOX:input:
output:The "Call-out" function is crucial when the pass box is installed between the rooms that are isolated from each other, as it summons an operator from the opposite side using the sound signal.input:
output:The UV unit's operating parameters can be configured independently for each side of the pass box, enabling the materials to be disinfected for varying durations when they are transferred from the hazardous zone to the clean zone and vice versa.input:
output:The "Cleaning" mode is intended to sanitize the work chamber of the pass-box without activating the audible and visible alarm.