Bubble Humidifier

A humidifier for oxygen therapy is a device that enables an increase in the relative humidity of the oxygen that is supplied to the patient. Typically, this medical gas lacks a sufficient humidity grade to be physiologically tolerable.input:
output:The jar is composed of polycarbonate or polysulphone, while the cap is composed of polypropylene with an inlet adaptor and an inlet connection that is coated with brass.TECHNICAL DATAinput:
output:Contents: Exclusively sterile water

Dimensions:Height: 190 millimeters

Diameter: 57 millimetersWidth: 67 millimeters

Weight: 145 grams

Volume: 200 milliliters

Substance: Polycarbonate jar (autoclavable at 121°C)

Polysulphone jar (autoclavable at 134°C)

Lid and outlet hose nipple: polypropylene

Chrome brass is the material of the inlet nut.

Diffuser: Polyethylene

Hose: Silicone

Cleaning: Water and a non-abrasive detergent. Solvents should never be employed.

Decontamination:Either an alcoholic solution or an alternative solution that is compatible with the material, as determined by the disinfectant manufacturer.Autoclave: Polycarbonate version, 121°C for 20 minutesPolysulphone version: 134°C for 18 minutes

Special case:Diffuser: Do not sterilize; exchange after each cleaning.Upkeep:Prior to operation, verify that the humidifier is intact and sealed. It is advisable to replace gaskets on a monthly basis. When the diffuser's micro perforations cease to exist, it should be replaced.

The capacity to endure:A minimum of 20 autoclave cycles is required, provided that all instructions accompanying the product are followed.