Automatic Packing Machine

· The BMP180 is a compact device that is well-suited for the blister packaging of capsules, tablets, pills, and other similar items in small batches.Format conversion is exceedingly simple.
· A vertical partition is present in the primary structure to distinguish the operating zones (front) from the drive section (rear).GMP-compliant cantilever (balcony type) layout for effortless, pharmaceutically compliant cleaning. Utilizes a digital position indicator to facilitate effortless adjustments.
· The gas-hydraulic pressure cylinder is used to regulate the sealing pressure, which can be adjusted to match the sealing area. Typically, a larger sealing area necessitates a higher pressure.· The Touch Screen User Interface allows for the independent adjustment of the blister length, thereby minimizing the duration of the format changeover.· The Touch Screen User Interface enables the blister length to be adjusted, thereby reducing the time required for a format changeover.· The forming temperature is significantly reduced by the contact heating method that the upper and lower plates employ. As a result, the power consumption, shrinkage, and deformation of the packaging material are reduced. The lidding material can be easily replaced within 10 seconds using a fast lock method. This method is suitable for plastic thermoforming and aluminum cold-forming blister packaging.
Principal Technical Parameters

Maximum output: 150 blisters per minute (57 x 80 mm aluminum/plastic blisters)Maximum Forming Area: 170×120mmMaximum Forming Depth: 15mmMaterial: Maximum width of 180mmPower of the machine: 8.5 kilowatts